Guralp-systems CMG-1T Manuel d'utilisateur télécharger pdf (Page 30)

CMG-1T Ocean Bottom Seismometer Operator’s

Guide

Section 8, Page 2 September, 1999,

Issue C

AFTER initial levelling. This command tries to reduce the

accuracy of levelling better than ± 0.3 degrees. It can only

be issued after the LEVEL command.

STATUS COMMANDS

HELP - displays all commands and parameters that are available.

SENSOR

STATUS - reports the digitized mass position outputs of the sensors.

BOWL

STATUS - reports the tilt and rotate orientation of the bowl and the X

and Y inclinometer readings.

SYSTEM SERIAL PORT

The baud rate of the serial line is 19,200 Baud 8 data bits, 1 stop bit, no parity

and no handshake.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Guralp-systems CMG-1T Manuel d'utilisateur Page 30