Guralp-systems CMG-5T Installation Manuel d'utilisateur télécharger pdf

CMG-5T

Accelerometer

Installation

Check you have all components and cables.

! CMG-5T strong motion broadband accelerometer

! Thick grey signal cable

! Sensor calibration data booklet

You will need a suitable digitizer or recording equipment

and a 12–24 V DC power supply. If you intend to bolt

the instrument to a hard surface, you will also need a

120 mm × 6 mm fixing bolt, and a fixing nut with spring

washer.

Keep the packaging, in case you need to transport the

sensor at a later date.

Prepare the installation site. Any solid surface, such as a concrete floor, is suitable to install

the instrument.

To create a suitable surface in temporary sites:

1. Dig a pit, or machine-auger a suitable hole for the sensor.

2. Prepare a quick-setting cement/sand mixture, and pour it into the hole.

3. “Puddle” the mixture by agitating, until the surface is level.

4. Leave the mixture for 2 - 12 hours depending on the cement type.

If you intend to bolt the instrument to a surface:

Scribe an accurate North/South line on the surface, and

grout in the fixing bolt around the middle of the line.

Place the sensor over the bolt, and rotate until the studs

and orientation lines on the instrument align with the

North/South line.

Fix the instrument in place.

1 2

Accelerometer 1
Installation 2

Résumé du contenu

Page 1 - Accelerometer

CMG-5TAccelerometerInstallationCheck you have all components and cables.! CMG-5T strong motion broadband accelerometer! Thick grey signal cable! Senso

Page 2 - Installation

InstallationAfter installing, you will need to zero the sensor outputs. This is most easily done through a Güralp digitizer.Connect the sensor’s outpu

Commentaires sur ces manuels

Pas de commentaire

Guralp-systems CMG-5T Installation Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Guralp-systems CMG-5T Installation. Guralp Systems CMG-5T Installation User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Guralp-systems CMG-5T Installation